Hydrogen energy proton exchange membrane appearance inspection

未标题-2.png

· Detection object: proton membrane surface coating products

Using a large line-scanning camera and a high-brightness light source, after the coating is dried and before entering the compound process, the encoder is used to trigger the camera to take pictures, and the acquisition card is used to obtain and link the pole piece images, and the surface of the coated surface is detected by software algorithms Quality, automatically identify defects and determine whether it is NG or not, label and mark NG incoming materials by itself, and self-check whether the label is affixed. At the same time, it has the function of statistics and storage of bad data.

· Detection accuracy: defect size>0.3mm×0.3mm.

· Applicable products: Detection of the proton membrane after coating and drying.

· Detection accuracy rate: missed judgment rate ≤ 1%, false positive rate ≤ 1%.

· Model switching: the entered model switching ≤15min.


Defect category

Defect characteristics

Definition

Specification

leaky substrate

leaky substrate

Surface coating peeled off or uncoated and leaks out of substrate subfilm

0.3mm×0.3mm

Streak

Crease/wrinkle

Fold marks where the substrate was bent, but did not leak the substrate

Width≥0.5mm

Length≥2mm

Width and length at the same time meet the condition of gray value difference > 30

Incomplete/broken

Substrate is incomplete or cracked or damaged

Crack / crack

Substrate material membrane diaphragm cracked and striped

Scratches/Scratches/Scratches/Indentations

Minor scratches/scratches/gouges/bruises on the surface of the coated area, but no leakage of metal

Spot

Dark spot/white spot

Black/white speckle characteristic in the coating

Diameter≥0.5mm

Gray value difference > 30

Particles

Particles/foreign matter

Foreign matter or particles mixed in the coating material

Diameter≥0.5mm

Gray value difference > 30


XML 地图 | Sitemap 地图